lotusmadandy
|
| posted on 21/2/10 at 04:56 PM |
|
|
F.S zzr1100 carbs and pinto inlet manifold
Selling on behalf of a friend as his engine has very low compression on no4 and wont run right.He doesnt want to rebuild the pinto so has gone back to
the twin choke carb.
The manifold is steel and was made by myself. As such it is not up to bogg bros standards but works a treat.the carbs are in perfect working order and
have trumpets with them
He is looking for £100+£10pp for the lot.
Andy
[Edited on 21/2/10 by lotusmadandy]
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
lotusmadandy
|
| posted on 21/2/10 at 05:04 PM |
|
|
Hope this pic uploads.
 
|
|
|
john_p_b
|
| posted on 21/2/10 at 07:18 PM |
|
|
where these set up and running on the pinto?
built a car, built a home, had a family. lost the family, lost the home, still got the car.
|
|
|
lotusmadandy
|
| posted on 21/2/10 at 08:56 PM |
|
|
The pinto was running fine,i ballanced the carbs and fitted 1.5mm jets but it hasnt been on the rollers.
I took the carbs back off as no 4 plug kept fouling due to lack of compression.
A set of smaller jets will come with the carbs and they can be soldered and drilled to any size.
Andy
|
|
|
