TimC
|
| posted on 23/2/10 at 01:19 PM |
|
|
TimC's Clear Out - Some of interest to Locost racers
Hi All
I need to get some photos taken but I am having a clear-out and have the following for sale:
- Omex Rev Limiter with Launch Control to suit Single Coil. The remote push button is missing but easily replaced, These sell new for over £100.
**Sold to the man with the Elan-plan**
- Set of four 13"x5.5" BWA 100 Alloy wheels fitted with Yoko A539s with loads of tread remaining. **Prov Sold**
- Pair of Cortina Hubs with new bearings - could do with a clean-up and paint. £20
- M16 Calipers in need of rebuild or ideal for exchange. £10
- Racetech Centre Mirror - New but without mounting bolt unless I can find an old one (possible) £12
- **Almost forgot** Mk1 XR2 X-flow Rocker cover with Filler hole at the right end (back of the engine bay) £20
All prices plus postage at cost.
Loads for smaller items in the garage so check back.
Thanks
TC
[Edited on 23/2/10 by TimC]
[Edited on 24/2/10 by TimC]
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
dunk3
|
| posted on 23/2/10 at 01:28 PM |
|
|
Hi tim, have you got a picture of the race tech mirror, and is it IVA ok. cheers dunk.
|
|
|
lsdweb
|
| posted on 23/2/10 at 01:34 PM |
|
|
Hi Tim
I'll have the rev limiter please!
Ta
Wyn
|
|
|
TimC
|
| posted on 23/2/10 at 01:34 PM |
|
|
quote:
Originally posted by dunk3
Hi tim, have you got a picture of the race tech mirror, and is it IVA ok. cheers dunk.
It's the same as this one from Rally Design except it
doesn't have the three-bolt mount - in fact, mine never had a mount like that. I'm afraid I have no idea about IVA.
|
|
|
dlatch
|
| posted on 23/2/10 at 05:38 PM |
|
|
tim any more info on the wheels?
ie: offset and tyre size
|
|
|
TimC
|
| posted on 23/2/10 at 07:33 PM |
|
|
quote:
Originally posted by dlatch
tim any more info on the wheels?
ie: offset and tyre size
Just been and checked (now home)
185/60/13 and ET18.
Without getting the calipers out I'd say 5-6mm tread left. Wheels quite tidy too, although not perfect by any means.
|
|
|
dlatch
|
| posted on 24/2/10 at 12:43 AM |
|
|
u2u sent 
|
|
|
