Krismc
|
| posted on 12/9/10 at 11:08 AM |
|
|
MR MCGOO'S GARAGE SALE
Due too circumstances, Ill be selling a lot of pieces from my car which where replaced due too either being told they where faulty (then finding out
they where wrong) or having too replace due to replacing something else and then not fitting. all parts are either new, very new or new but been
sitting on my car for 2 years and not used - then theres the engine parts which are from either a 20k zetec or a 40k zetec. only thing thats iffy is
the zetec head which i have been told can be fixed but i dont know how.
So far ive got back a few bits and prices are how much i payed and in red how much ill take but ill take offers at moment until ive sorted all parts
out.
a) Megasquirt ECU £240 ( can anyone confirm which version it is?) its got a vacuum pipe but no wiring - im awaiting plug to be returned.
£180
b) 2 litre Zetec low milage - with badly ported head £250 £100
c) Series 600 airbox look a likey £150 (never used) no backing plate at moment until MNR find it, if they do find it its cut for GXSR TB's (back
plate £10) if not they make them too suit £120
d) Clutch for 2 litre Zetec £26 £20
e) Flywheel for 2 litre Zetec £12 £10
f) Ram air Pipe 4inch by 1ft half ft longish (ill have to measure) sure steve R wanted this and i said £5 to him (fits 600 airbox) and there should be
another 3ft lenght at MNR (£10) £5 short £10 long
G) piper 285 Cams £445 £300
H) Turbo sport adjustable anadised ally cam pullys £100 £80
I) Inlet for Zetec engine to accept throttle boddies (did fit unspaced GXSR throttle boddies) £240 £100
Loads more new/old pullys, pipes, belts, cam covers, shiny bits etc just and and ill have it.
i need to sell as much as possible or i wont be able too keep car once it finally gets IVA pass, so barter with me but dont take the mick
send u2u or
07929167193
kris.mcgough@sky.com
[Edited on 12/9/10 by Krismc]
[Edited on 12/9/10 by Krismc]
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
Krismc
|
| posted on 12/9/10 at 03:56 PM |
|
|
Had a few people quering airbox.
Air box is slimline so fits under MNR bonnet(or similar tight spaces) easily, Has a built in cone filter, has a 4 inch inlet and the inlet is on RHS
looking at it- great piece of kit.
ill confirm demensions but very similar to this
[Edited on 12/9/10 by Krismc]
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
lotusmadandy
|
| posted on 12/9/10 at 06:40 PM |
|
|
first dibs on the engine please.
Andy
|
|
|
Krismc
|
| posted on 12/9/10 at 07:30 PM |
|
|
Yea, ill have too check all bits are there first. ill have a looky looky through week and make sure it is.
see you sat andy.
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
coozer
|
| posted on 12/9/10 at 08:57 PM |
|
|
Sorry Kris, forgot about the tubing, I'm still up for it.
Stafford show this weekend though
1972 V8 Jago
1980 Z750
|
|
|
Krismc
|
| posted on 13/9/10 at 06:16 AM |
|
|
No bother mate, ill keep it too one side.
.....'when i find it'
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
Krismc
|
| posted on 13/9/10 at 05:57 PM |
|
|
All U2us Replied too.
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
Krismc
|
| posted on 15/9/10 at 06:10 PM |
|
|
Updated list.
Megasquirt ECU With Vacuum pipe - im awaiting plug to be returned But £180 as is - UNDER OFFER
2 litre Zetec low milage - with badly ported head £100 - Andy got Dibs
Series 600 airbox look a likey (never used) no backing plate at moment until MNR find it, if they do find it its cut for GXSR TB's (back plate
£10) if not they make them too suit £120 - cheap as chips
Clutch for 2 litre Zetec £20- might keep this for me
Flywheel for 2 litre Zetec £10
Ram air Pipe 4inch by 1ft and half ft longish (ill have to measure) £5 short - Coozer got dibs
Ram air Pipe 4inch by 2ft and half ft longish (ill have to measure))£10 long
piper 285 Cams £300 - might keep these for me.
Turbo sport adjustable anadised ally cam pullys £80
Steel Inlet for Zetec engine to accept throttle boddies (did fit unspaced GXSR throttle boddies)£100
Ceized 3.62 Limited slip diff im told its worth £350 unceized ha ha and with cost £30-£50 to fix so £200
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
