FASTdan
|
| posted on 7/12/10 at 07:41 AM |
|
|
Zetec Bike Throttle Body Manifold
Brand new and unused DANST Engineering inlet manifold to suit the 1.8/2.0 Zetec running bike throttle bodies. As you can see the manifold is made to
the standard zetec spacings (92mm) therefore the bodies will need to be spaced to suit. Runners are 44.5mm OD with 3mm wall and are at a 10deg angle
to aid with clearance to a Sevens top chassis member.
As seen on ebay, but discounted to LCB members, £108 including carriage.
Ford ZETEC Bike Throttle Body Manifold * Aluminium * on eBay (end time 05-Jan-11 23:31:17 GMT)
Also available if required is the 45mm fluro lined silicone hose fitting kit, £20. 
NEW danST WEBSITE NOW LIVE! Bike carbs, throttle bodies and more......
http://www.danstengineering.co.uk/
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
|
|
DavidW
|
| posted on 7/12/10 at 10:22 AM |
|
|
I've had a carb manifold from Dan and it was very nice and he's a good chap to deal with.
Hope that helps.
David
|
|
|
