MakeEverything
|
| posted on 16/1/11 at 05:28 PM |
|
|
fs: "Book" Chassis
Hi there,
Ive been contemplating this for a while, but i need to get rid of the book chassis that i made when i first got into kit cars. I bought the metal in
kit form from ARMOTO Engineering, and welded it myself.
It has been mig and tig welded, though im not a coded welder and used CO2 for the TIG work, gasless for the MIG. I cut open some test welds and got
little in the way of bubbles, however the reason for my hesitance in selling until now is because i wasnt sure if i should keep it and use it in the
future.
I welded it together on a 3/4" ply table, and is straight. I was going to fit a 2.9 V6 so has been changed slightly to accommodate various bits
of the running gear but the fundamental dimensions are the same as uncle Rons. I had plans for additional strengthening beams but didnt put these
in.
I must stress, that although i would be happy to test this myself, i wouldnt want anyone else to buy this under any false pretences, so im selling
with as much information as i can give. By all means, inspection prior to purchase can be arranged.
Also, i had a play with different methods of mounting the front brackets, and put an extra plate in on one side to get some measurements. This was
when i stopped, so some of it is still tacked on, and the plate can be cut off easily with a careful grinder.
Really, im just after the space and some money back so that i can put some proper lighting in the garage.
Pictures in my photo archive.
here
Offers welcome.
[Edited on 16-1-11 by MakeEverything]
Kindest Regards,
Richard.
...You can make it foolProof, but youll never make it Idiot Proof!...
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
MakeEverything
|
| posted on 17/1/11 at 03:29 PM |
|
|
If i dont get any more interest by the end of this week, ill be "Dismantling" it and keeping it for brackets etc. I want the space back,
so that i can put up some decent lights. and start tidying up.
Kindest Regards,
Richard.
...You can make it foolProof, but youll never make it Idiot Proof!...
|
|
|
montythemole
|
| posted on 20/1/11 at 09:56 AM |
|
|
So this one:
Whereabouts are you more specifically?
1985 Dutton Phaeton Series 3 1300GT
|
|
|
|
