carlknight1982
|
| posted on 15/3/11 at 11:17 PM |
|
|
FS - GARAGE CLEAR OUT
Ok Lads time for a clear out again......
1/ 150A Siegen Mig welder, Comes as it come out of the box except the gas pipe is missing- comes with a small (disposible bottle) regulator, pipes can
be picked up for pennies from pirtex etc etc.
£150 Ono
2/ Complete Pinto Electronic Ignition Set up, coil, modulator, dizzy cap and rotor
£50 Ono
3/ 20m (poss 25) Active Usb lead, never used but unpackaged
£5
4/ Twin Webber Dcoe manifold to suit a pinto
£30 Ono
5/ set of 4 alloy wheels ford pcd and offset inc center caps and good tyres (photo 16042009259 in my archieve)
£75 Ono
6/ Pinto angled distributor cap, new from burton power
£10
7/empty helium bottle (10KG I think) was used for Argoshield but I cant get it refilled anymore - Free to collector
8/ Gas Fired Workshop heater (portable gas fire) C/W Propane Regualtor GWO only 1 year old. (no gas but can provide an empty bottle igf req) selling
due to purchase of diesel heater
£75 Ono (£100 + In B&Q)
9/ 20M Length of 4mm 3Core SWA (Steel Wire Armour) cable brought for a shed that has never been put up - Expensive to buy
£25 less than 1/3 original price!
10/ CW20s Gland pack to suit above (Water proof entry glands) 2 in the pack
£10
Everything is located @ MK44 Nr Bedford AutoDrome.
I do however cover a large area for work and have some flexibility with where I go and when so I may be able to deliver if your in my area.
Carl
Logic will get you from a A to B
Imagination will take you everywhere.
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
Strontium Dog
|
| posted on 16/3/11 at 12:04 AM |
|
|
Hi, if you ever get down to Plymouth or Bournemouth (Sturminster Marshall) I'd like the wheels please!
Or if we can arrange some other way of getting them here. I am in no hurry for them
[Edited on 16/3/11 by Strontium Dog]
|
|
|
carlknight1982
|
| posted on 16/3/11 at 07:50 AM |
|
|
I have a job that way, in Bournemouth but not sure when I will be down that way could be next week might not be for a month.
I will however be in portsmouth on the week after next if you wan meet me there id knock em down to £50 but it would be either day time or early
morning.
Logic will get you from a A to B
Imagination will take you everywhere.
|
|
|
ashg
|
| posted on 16/3/11 at 10:51 AM |
|
|
carl how many amps will that 3 core carry? you know where i live 
im guessing 4mm is around 8awg so 40ish amps? if it is i will have it next time your down my way.
[Edited on 16/3/2011 by ashg]
Anything With Tits or Wheels Will cost you MONEY!!
Haynes Roadster (Finished)
Exocet (Finished & Sold)
New Project (Started)
|
|
|
carlknight1982
|
| posted on 16/3/11 at 11:45 AM |
|
|
No worries ash I'm in pembury next wk
3 Core 4mm still available, 6mm is sold to
Ash G
3 core 4mm first dibs too emsfactory via U2U
[Edited on 16/3/11 by carlknight1982]
Logic will get you from a A to B
Imagination will take you everywhere.
|
|
|
Strontium Dog
|
| posted on 16/3/11 at 10:09 PM |
|
|
quote:
Originally posted by carlknight1982
I have a job that way, in Bournemouth but not sure when I will be down that way could be next week might not be for a month.
I will however be in portsmouth on the week after next if you wan meet me there id knock em down to £50 but it would be either day time or early
morning.
That's a bargain bud but I,m on Dartmoor and 'tis my buddy who lives in Bournemouth. I don't mind paying now and getting them later
though when you happen to be coming to Bournemouth as I have no need of them for 2-3 months yet!
|
|
|
Danozeman
|
| posted on 18/3/11 at 07:58 PM |
|
|
u2u ref welder.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
