Oil cooler complete setup Pinto
Cooler Setrab 13 row 235 mm with 1/2" 90 degree fittings
Take off plate 1/2" push on and pinto centre bolt
Thermostat 1/2" push on
Oil temp sender adaptor 1/2" push on with 1/4 npt oil temp sender
I have included the sender as most are 1/8 npt, this adaptor was purpose built for the sender.
The sender is standard range so will work with nearly all electronic oil temp gauges, this one was bought for and worked with a Smiths gauge.
The only thing that needs to be done is to run an earth from the sender adaptor as when it is in the oil line the rubber hose isolates it from
earth.
£100 the lot
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
