Crossflow Alternator Adjustable Bracket new £14 inc P&P
Knocked a few of these up for folk after they expressed an interest in the one I made for my own car, see thread
http://www.locostbuilders.co.uk/forum/9/viewthread.php?tid=177204
forum members £14 by bank transfer, or £14.60 by paypal, posted out 1st class recorded, hopefully within 2 days of receiving funds
or £18 off me on ebay :-) listing detail below
Adjustable link to replace the slotted bracket used by ford as standard on the crossflow in RWD applications in Escorts and kit cars for track, race
and rally. Seen in the second picture fitted to a crossflow fitted with a stock water pump and crank pulley with an 800mm belt.
Alloys easy and accurate adjustment as one joint is left hand thread and the other right
Measures 98mm centre to centre fully closed and 134mm open (with 10mm of thread engaged- these are effectively in compression when fitted)
Anodised alloy hex bar which is easy to adjust, along with the nuts which require a 13mm spanner. Ends are 8mm
Brand new and despatched recorded delivery to the UK
I have a number of these and they're advertised elsewhere. Other lengths to suit other applications most likely the same price, contact me with
your requirements
Auction is for 1 only, consisting of anodised bar, two joints and lock nuts to suit
The true home of cars born under the Sylva name - http://jpsc.org.uk/forum
STM Phoenix R1
Sold-Sylva Striker 1300xf, 40s etc
Sold-Sylva Phoenix, 1300xf, BVH, 234cam, 2xDCOE 40s, live axle - 'old school', rally car and a few bikes
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
