peter030371
|
| posted on 31/5/15 at 10:54 AM |
|
|
Throttle bodies and Duratec inlet plate
Due to the fact I have now purchased some Cosworth roller barrel throttle bodies the bits a bobs I had collected to build a Duratec manifold to take
some GSXR bodies are now no longer needed.
1) GSXR Throttle bodies stripped of secondary butterfly and ready to be re-spaced to suit new engine. The fuel rail is supplied with them as is the
TPS, inlet clamps and outlet rubbers but no injectors (see below). I am unsure if these are GSXR1000 or 1300 but the inlet diameter is circa 49mm and
outlet side is circa 42mm (my vernier is at work but if you want me to double check this I can do so tomorrow?). I would like £75 collected or £85
delivered by UPS.
 
2) Duratec inlet manifold plate. This is originally from DanST Engineering and is new and unused. £15 including delivery (or £10 collected)
3) 4 off Honda Blackbird Injectors to suit above. These have been fully serviced and tested and all work 100% as new. They are good for about
335cc/min @ 43psi so 250bhp+ should be no problem. I can't put a picture of them up right now as they are in my draw at work! (I will pop a
picture up tomorrow when I get a chance). It cost me £50 just to get them cleaned and tested so I think £75 collected or £85 delivered by UPS is a
good price?
Any questions then U2U me 
[Edited on 1/6/15 by peter030371]
[Edited on 1/6/15 by peter030371]
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
peter030371
|
| posted on 1/6/15 at 07:54 AM |
|
|
Throttle bodies sold pending payment
|
|
|
jeffw
|
| posted on 1/6/15 at 08:28 AM |
|
|
I have another set of your TBs in my garage.....about time you came and got them!
|
|
|
peter030371
|
| posted on 1/6/15 at 09:40 AM |
|
|
quote:
Originally posted by jeffw
I have another set of your TBs in my garage.....about time you came and got them!
Are you sure? I thought I had already been and got them (and sold them!)  If you have any more going spare I can take them off your hands and sell
them for you 
|
|
|
jeffw
|
| posted on 1/6/15 at 10:13 AM |
|
|
Ummm....they where such a fixture I may have forgotten that you picked them up. Did you get the bill for the five years storage? lol
|
|
|
peter030371
|
| posted on 1/6/15 at 10:54 AM |
|
|
I thought the 'storage charge' was part of the deal for the part worn tyres I got from you.....in fact that was probably when I picked
them up so that was early 2013
|
|
|
