Krismc
|
| posted on 10/9/08 at 10:09 AM |
|
|
Unfinished MNR RT Kit
Regretably  my pal has his unfinished kit car up for sale, due too having just bought his first house and also having no garage.
it is too look very similar to this when complete......
 (pic from MNR web)
It was bought as a full kit with a few extras..
Vortx RT
1) One of the largest cabin areas for this style of car ( able to acomodate a 6ft 6 driver with ease )
2) Dedicated Car Engine Engine Chassis (can be changed with a cradle)
3) Front Suspension With protec Damper Units
4) Fully Polybushed Independant double wishbone Suspension All Round.
5)Chassis Constructed Entirely From Round Section 16 & 18 Guage Tubing.
6)Triangulated And Braced Front And Rear Floor Pans
7)Additional Rear Bulkead And Diff Area Triangulation
8)Additional Front Bulkead And Foot Area Triangulation
9)CDS Rear Roll Hoops With Stays (cobra hoops )
10)Fully Integrated Rear Chassis Section For Improved Fuel Tank Protection, With Crushable Rear Structure To Absorb Rear Impacts.
11) Side Bracing For Greater Protection In Side Impacts
12)Easily Adjustable Front And Rear Tracking.
13)Easily Adjustable Front And Rear Camber.
14)Floor Mounted Twin Master Cylinder Pedal Box With Brake Balance Adjuster.
15)One piece main body section
16)One piece grp interior tunnel cover
RAC Approved rollcage (suitable for sprints, Hillclimbs,Circuit Racing)
17)SVA Compliance
This car was bought as a full kit and is chassis number 41 (mine is No 40) it has a fully powdercoated chassis and all the body panels are in Orange
(RAL 2003) he has also bought 2 black GRP seats, and a sierra as a doner, all the parts have been stripped including the engine (if require this can
be changed) its a 1600cvh.
included is ...
Twin webbers, manifold, various clutch cables, type 9 gear box, new radiator, new fan, sender etc.
chassis is currently rolling, with most body panels fitted, and the engine/gearbox in situ. with fuel tank and lines in place.
pedal box, fuel lines, brake lines, wiring harness are all fitted.
Basically all that is required to finish this kit is the engine completed(few parts required). Lights, propshaft and guages to be bought. rear
brakes are there but not fitted and reccomend they be exchanged before use.
£3995 or nearest offer, if local will deliver (50 mile max)
car located in newcastle, phone colin on 07789092642 or bpm99@hotmail.com
or any questions on just car i might be able to answer.
[Edited on 10/9/08 by Krismc]
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
Mr Whippy
|
| posted on 10/9/08 at 10:12 AM |
|
|
I'll take it if it's free since I see no price  yeah first dibs!!
|
|
|
tegwin
|
| posted on 10/9/08 at 10:13 AM |
|
|
Is there a price?
------------------------------------------------------------------------------------------------------------------------
Would the last person who leaves the country please switch off the lights and close the door!
www.verticalhorizonsmedia.tv
|
|
|
Mr Whippy
|
| posted on 10/9/08 at 10:15 AM |
|
|
quote:
Originally posted by tegwin
Is there a price?
ha ha ha!! saw it first  it's all mine!!
[Edited on 10/9/08 by Mr Whippy]
|
|
|
tegwin
|
| posted on 10/9/08 at 10:19 AM |
|
|
LOL....I got distrated by some work...
I thought you had a new job where you would be "so busy" that you wouldnt be able to come on LB...shocking!
------------------------------------------------------------------------------------------------------------------------
Would the last person who leaves the country please switch off the lights and close the door!
www.verticalhorizonsmedia.tv
|
|
|
Krismc
|
| posted on 10/9/08 at 10:31 AM |
|
|
£3995 or nearest offer, if local will deliver (50 mile max)
car located in newcastle, phone colin on 07789 092 642 or bpm99@hotmail.com
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
Krismc
|
| posted on 13/9/08 at 02:36 PM |
|
|
BUMP
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
Krismc
|
| posted on 16/9/08 at 04:12 PM |
|
|
bump
|
|
|
