19sac65
|
| posted on 31/12/13 at 05:57 PM |
|
|
zetec cylinder head and sump
i have a silvertop cylinder head c/w valves and standard cams / pulleys
came off a good runner that failed on the bottom end
kept it "just in case" but fed up of moving it about
also an alloy sump from an escort zetec
bowl at the front and its 1/4" shorter than a cvh one so could be a cheap alternative to an aftermarket shallow one,or one to cut up and weld if
you want it shallow
ive got one in my westfield and its fine - about the same as the bell housing
reasonable offers on both - all funds going to my zetec conversion
located near J10 M42
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
bob
|
| posted on 1/1/14 at 02:03 PM |
|
|
Zetec Head
Zetec head ... 1.8 or 2.0 ?
|
|
|
19sac65
|
| posted on 2/1/14 at 12:50 PM |
|
|
its a standard 1800 bob
|
|
|
bob
|
| posted on 2/1/14 at 08:15 PM |
|
|
Thanks, i need an 1800 head for my old engine.
I am just trying to work out the logistics of J10 M42.
Is it 115 or basic 105 cams ?
|
|
|
19sac65
|
| posted on 2/1/14 at 09:21 PM |
|
|
Bob
As far as ime aware on 1.8 silver tops there are only 2 cams
115 and 130 - these are 115 ones
I downloaded pics of cams to id mine and there was 3 types 115-130 and 2.0
Where are you located
|
|
|
bob
|
| posted on 3/1/14 at 05:57 PM |
|
|
I'm located about 1 mile from J1 M3 Ashford
Any pics of the head ?
|
|
|
19sac65
|
| posted on 3/1/14 at 06:14 PM |
|
|
U2u me your email address bob
Ille take some in the morning along with the cam id pics
|
|
|
19sac65
|
| posted on 4/1/14 at 08:06 PM |
|
|
head sold
sump still available
|
|
|
bob
|
| posted on 7/1/14 at 06:27 PM |
|
|
ZETEC HEAD
Big thanks ..... ZETEC HEAD landed safely this morning.
|
|
|
