Coose
|
| posted on 31/8/09 at 11:46 AM |
|
|
Things for sale (wheels, carbs, sump)
Afternoon all,
I'm having a garage clearout and have a few bits to sell and thought that I would offer them here before facing the wrath of eSkip. They are all
located near York but I may be able to deliver/meet you somewhere as I tend to get around the country a bit: -
Ally Cat Wheels
Two pairs, both 6" x 14", ET16 offset in pretty good, straight condition. One pair have a pcd of 108mm (Ford etc.) and the other 100mm
(Vauxhall, Triumph etc.). They were taken off my old Striker when I changed to Ford front uprights and 13" wheels. They would benefit from a
polish and repaint as some of the paint is lifting, with a bit of minor corrosion underneath (one pic shows the about the worst of it). Make me an
offer for either the set of four or per pair.
100mm pcd wheels: -
 
VX Wheels
 
VX2
The worst of the corrosion: -
 
VX corrosion
108mm pcd wheels: -
 
Ford Wheels
Weber carbs
Two Weber downdraught carbs, one is a DVAG 32 (the one not on the manifold), the other is unknown as I can't find any markings and would probably
only be good for spares.
I think that I once used the DGAV 32 on my old 1300 x-flow and it seemed to be ok, though has been sat in the garage for the last few years. Again,
make an offer.
Carbs: -
 
Carb1
 
DGAV 32
 
Other Weber
Chopped Zetec sump
This belongs to a friend and was bought with a Zetec, but I couldn't tell you which so I don't know which one it will fit. It has been
chopped and baffled but it wouldn't fit in his Cateringvan and so he ended up buying one from elsewhere. I don't know if it leaks but the
welds look ok. Again, make an offer if you're interested!
Sump: -
 
Sump1
 
Sump2
 
Sump3
 
Sump4
 
Sump5
Spin 'er off Well...
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
Coose
|
| posted on 8/9/09 at 07:24 AM |
|
|
Boing!
Spin 'er off Well...
|
|
|
bmseven
|
| posted on 9/9/09 at 08:20 PM |
|
|
I'm confused, the Ford/Triumph rims are they metric or imperial PCD?
Thx
BMW 7 Resource
Bures Pit anyone?
|
|
|
Coose
|
| posted on 13/9/09 at 09:11 PM |
|
|
Ok, I may be wrong. The ones that I said were 100mm pcd may not be, but they came off the front of my Striker that used Vauxhall Viva uprights so
Google says that they will be 101.8mm. The other pair are definitely 108mm (straight off an English live axle).
So, the non-Ford pair are Vauxhall Viva fitment and will not fit Triumph Herald uprights (which were 3.75" pcd). I'll measure them
tomorrow if you are interested.
Spin 'er off Well...
|
|
|
richyb
|
| posted on 14/9/09 at 04:04 PM |
|
|
you have U2U re sump
|
|
|
owelly
|
| posted on 14/9/09 at 07:50 PM |
|
|
Cooooooooose! The Viva ones will be 4" PCD or 101.8mm........
http://www.ppcmag.co.uk
|
|
|
Coose
|
| posted on 14/9/09 at 08:20 PM |
|
|
quote:
Originally posted by owelly
Cooooooooose! The Viva ones will be 4" PCD or 101.8mm........
Aye, thy is correct old bean! I was wrong but now I'm not! 
Spin 'er off Well...
|
|
|
Coose
|
| posted on 2/10/09 at 07:05 PM |
|
|
Sump now sold. The rest is still available.
Spin 'er off Well...
|
|
|
zilspeed
|
| posted on 3/10/09 at 12:20 PM |
|
|
Those would fit ye olde Sylva...
What are we talking for the ones with the 4" PCD ?
|
|
|
Coose
|
| posted on 4/10/09 at 08:59 PM |
|
|
Aye, that they would as that's what they came off! 
As I said in the ad., make me an offer!
Spin 'er off Well...
|
|
|
