mads
|
| posted on 10/3/11 at 09:03 PM |
|
|
FS - 1x raceleda sierra uprights and 1x full raceleda sierra upright kit
Right folks,
I have the following for sale...
1x raceleda sierra uprights. You will need some hubs and appropriate bearings (and a couple of other bolts) to complete this but otherwise includes
the uprights, brake caliper brackets, steering rack adapter. £180 ono (+p&p - though would prefer collection as dont get much time to go to post
office)
1x full raceleda sierra upright kit. This does include the hubs and bearings but you will need some dust caps (available from Ford). Please note that
you cannot use standard sierra discs and calipers with this - see my reply further down.
£320 ono (+p&p - though would prefer collection as dont get much time to go to post office)
Not had chance to take photos but will do at request...
Selling as could do with the cash to buy some other more vital parts for the car at the minute.
Thanks,
mads
[Edited on 11/3/11 by mads]
We gain knowledge faster than we do wisdom!
Life is not a journey to the grave with the intention of arriving safely in a pretty and well-preserved body, but rather to skid in
sideways, thoroughly used, totally worn out and loudly proclaiming... "f*ck, what a trip!"
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
dave-69isit
|
| posted on 10/3/11 at 09:40 PM |
|
|
did u get in touch with mk about your bits
|
|
|
omega0684
|
| posted on 10/3/11 at 11:07 PM |
|
|
mads the hubs are cortina not sierra!
THEY CANNOT BE USED TOGETHER!
so you can't sell it as a kit, you would have to sell the 2 sets of sierra uprights separately and the cortina alloy hubs separately in
afraid.
[Edited on 10/3/11 by omega0684]
I love Pinto's, even if i did get mine from P&O!
|
|
|
mads
|
| posted on 11/3/11 at 07:27 AM |
|
|
quote:
Originally posted by omega0684
mads the hubs are cortina not sierra!
THEY CANNOT BE USED TOGETHER!
so you can't sell it as a kit, you would have to sell the 2 sets of sierra uprights separately and the cortina alloy hubs separately in
afraid.
[Edited on 10/3/11 by omega0684]
you have u2u. have modified original post to indicate this but i did originally say that the buyer would need to use cortina (or rather M16 as we now
know) discs. the reason the sierra ones don't fit is the internal diameter of the sierra discs is about 3mm too large. the cortina ones would
fit. i suppose the only other thing would be that you won't use standard sierra calipers (i recall reading something about M16 replacements
somewhere on here).
Just found a link confirming the above:
http://www.racedandrallied.com/performance-trackday-cars-for-sale/performance-trackday-car-parts-for-sale/raceleda-sierra-upright-k
quote:
Please note the standard when fitting Raceleda Sierra Uprights you will not be able to use the standard Sierra calipers and discs.
Braking wise you can opt for any standard Ford M16 caliper / disc combination. Check out the Raceleda R16 calipers and discs or opt the complete
Raceleda Sierra full front end kit.
[Edited on 11/3/11 by mads]
We gain knowledge faster than we do wisdom!
Life is not a journey to the grave with the intention of arriving safely in a pretty and well-preserved body, but rather to skid in
sideways, thoroughly used, totally worn out and loudly proclaiming... "f*ck, what a trip!"
|
|
|
Yazza54
|
| posted on 11/3/11 at 07:48 AM |
|
|
Can't you just use sierra hubs instead?? :/
I'm unhappy cos I eat and I eat cos I'm unhappy
|
|
|
mads
|
| posted on 11/3/11 at 07:51 AM |
|
|
only if you can get alloy sierra hubs that will fit. i couldn't find any.
We gain knowledge faster than we do wisdom!
Life is not a journey to the grave with the intention of arriving safely in a pretty and well-preserved body, but rather to skid in
sideways, thoroughly used, totally worn out and loudly proclaiming... "f*ck, what a trip!"
|
|
|
Yazza54
|
| posted on 11/3/11 at 07:54 AM |
|
|
quote:
Originally posted by mads
only if you can get alloy sierra hubs that will fit. i couldn't find any.
I know hi spec do ally hubs for sierra fitment. So raceleda made sierra uprights that don't fit a standard sierra hub? Makes a lot of sense!
I'm unhappy cos I eat and I eat cos I'm unhappy
|
|
|
mads
|
| posted on 11/3/11 at 07:57 AM |
|
|
quote:
Originally posted by Yazza54
quote:
Originally posted by mads
only if you can get alloy sierra hubs that will fit. i couldn't find any.
I know hi spec do ally hubs for sierra fitment. So raceleda made sierra uprights that don't fit a standard sierra hub? Makes a lot of sense!
i know. one of the other reasons i'm selling as i'd already bought a wilwood brake kit. you can at least use M16s which are widely
available.
We gain knowledge faster than we do wisdom!
Life is not a journey to the grave with the intention of arriving safely in a pretty and well-preserved body, but rather to skid in
sideways, thoroughly used, totally worn out and loudly proclaiming... "f*ck, what a trip!"
|
|
|
mcerd1
|
| posted on 11/3/11 at 10:11 AM |
|
|
quote:
Originally posted by Yazza54
quote:
Originally posted by mads
only if you can get alloy sierra hubs that will fit. i couldn't find any.
I know hi spec do ally hubs for sierra fitment. So raceleda made sierra uprights that don't fit a standard sierra hub? Makes a lot of sense!
I always understood them to be copys of there cortina ones, but modified to the same geometry as a sierra one with a mushroom adapter in it (i.e. to
suit cars with double wishbones made for sierra uprights)
so none of the bits in these uprigts will actually fit a sierra 
[Edited on 11/3/2011 by mcerd1]
-
|
|
|
mads
|
| posted on 11/3/11 at 10:22 AM |
|
|
quote:
Originally posted by mcerd1
quote:
Originally posted by Yazza54
quote:
Originally posted by mads
only if you can get alloy sierra hubs that will fit. i couldn't find any.
I know hi spec do ally hubs for sierra fitment. So raceleda made sierra uprights that don't fit a standard sierra hub? Makes a lot of sense!
I always understood them to be copys of there cortina ones, but modified to the same geometry as a sierra one with a mushroom adapter in it (i.e. to
suit cars with double wishbones made for sierra uprights)
so none of the bits in these uprigts will actually fit a sierra
[Edited on 11/3/2011 by mcerd1]
no, but then you wouldn't use them in a sierra, rather in a kitcar which uses the sierra geometry so they would fit but as said you would need
to use M16 brakes and discs.
We gain knowledge faster than we do wisdom!
Life is not a journey to the grave with the intention of arriving safely in a pretty and well-preserved body, but rather to skid in
sideways, thoroughly used, totally worn out and loudly proclaiming... "f*ck, what a trip!"
|
|
|
