Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: smaller rear fog light for Phoenix
philfingers

posted on 8/11/14 at 09:40 AM Reply With Quote
smaller rear fog light for Phoenix

What's everyone else using?

want a smaller fog to replace this one, it's too big for the mounting place on the body
any suggestions, I had a smaller one on the old Phoenix. I've found some smaller round ones at 75mm but not over keen on LED, not in keepign with everything else. Would like to be E marked but not over fussed as unlikely to use in the fog anyway
this is what i have


and this is what I had on my old Phoenix






The true home of cars born under the Sylva name - http://jpsc.org.uk/forum

STM Phoenix R1
Sold-Sylva Striker 1300xf, 40s etc
Sold-Sylva Phoenix, 1300xf, BVH, 234cam, 2xDCOE 40s, live axle - 'old school', rally car and a few bikes

View User's Profile View All Posts By User U2U Member
40inches

posted on 8/11/14 at 10:05 AM Reply With Quote
The smallest ones I found came from CBS. They fitted under the back panel and passed the minimum height for IVA. They can be panel mounted.
Description
Description

View User's Profile View All Posts By User U2U Member
philfingers

posted on 8/11/14 at 10:51 AM Reply With Quote
thanks, might be the think, will take a look





The true home of cars born under the Sylva name - http://jpsc.org.uk/forum

STM Phoenix R1
Sold-Sylva Striker 1300xf, 40s etc
Sold-Sylva Phoenix, 1300xf, BVH, 234cam, 2xDCOE 40s, live axle - 'old school', rally car and a few bikes

View User's Profile View All Posts By User U2U Member
adithorp

posted on 8/11/14 at 11:16 AM Reply With Quote
How about one of these from SVC

They're the inner lamp from the modular Hella lamps but you should be able to mount on it's own through the panel with a bracket behind.





"A witty saying proves nothing" Voltaire

http://jpsc.org.uk/forum/

View User's Profile View All Posts By User U2U Member
philfingers

posted on 8/11/14 at 11:27 AM Reply With Quote
thanks Ade, might be better. I wonder if I could just use a stop/tail like the other ones I have, would all match then. fog is 21w same as a brake light, so is there any other difference other than the obvious; comes on with fog switch not brake lights!

my tracking was toe out at front 20' [1.6mm]. rear was parallel. garage floor isn't flat so need to check cambers with car in the other direction and average the figures. looks like more camber on OSF tho. . .





The true home of cars born under the Sylva name - http://jpsc.org.uk/forum

STM Phoenix R1
Sold-Sylva Striker 1300xf, 40s etc
Sold-Sylva Phoenix, 1300xf, BVH, 234cam, 2xDCOE 40s, live axle - 'old school', rally car and a few bikes

View User's Profile View All Posts By User U2U Member
Hadders

posted on 8/11/14 at 01:44 PM Reply With Quote
Have a look at early BMW Minis. They have a small and neat solution in the bumper. I haven't measured but they look like a good fit for the shape on the Phoenix and would look OEM as they are flush fit. Or could use Peugeot 206, although they're a slightly different shape.
View User's Profile View All Posts By User U2U Member
adithorp

posted on 8/11/14 at 05:23 PM Reply With Quote
quote:
Originally posted by philfingers
thanks Ade, might be better. I wonder if I could just use a stop/tail like the other ones I have, would all match then. fog is 21w same as a brake light, so is there any other difference other than the obvious; comes on with fog switch not brake lights!

my tracking was toe out at front 20' [1.6mm]. rear was parallel. garage floor isn't flat so need to check cambers with car in the other direction and average the figures. looks like more camber on OSF tho. . .


Fog lamps lens/reflector gives a narrower, higher intensity beam.





"A witty saying proves nothing" Voltaire

http://jpsc.org.uk/forum/

View User's Profile View All Posts By User U2U Member
philfingers

posted on 8/11/14 at 08:18 PM Reply With Quote
found these, might work, bit cheaper than through SVC website too
will have a measure up in a bit

Hella Mix &' Match 55mm INNER REAR FOG LIGHT


[Edited on 8/11/14 by philfingers]





The true home of cars born under the Sylva name - http://jpsc.org.uk/forum

STM Phoenix R1
Sold-Sylva Striker 1300xf, 40s etc
Sold-Sylva Phoenix, 1300xf, BVH, 234cam, 2xDCOE 40s, live axle - 'old school', rally car and a few bikes

View User's Profile View All Posts By User U2U Member
philfingers

posted on 22/11/14 at 08:15 PM Reply With Quote
well I bought one of these REAR FOG LIGHT 2NE 006 609-007 BY HELLA
not really impressed at all, no rubber seal and there's a hole in the bottom to let the water out!
still looking for the type used on my first Phoenix [yellow one above]. Don't really want an LED one or round really, as it's a rectangular mount on the body, will look odd I think. Just a small one as above! like trying to find a needle in a haystack!
if anyone has one and can see a name or part number on it that would be great!





The true home of cars born under the Sylva name - http://jpsc.org.uk/forum

STM Phoenix R1
Sold-Sylva Striker 1300xf, 40s etc
Sold-Sylva Phoenix, 1300xf, BVH, 234cam, 2xDCOE 40s, live axle - 'old school', rally car and a few bikes

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.