Hi

I need to find a couple of connectors for these side repeaters.

Image deleted by owner

I know they should be easy to find at a scrap yard but I don't have easy access to one.

Beer tokens waiting.

Thanks

David

I used ordinary crimp on spade connectors (Halfords) for these with some heatshrink over the top to protect from shorts etc.

Mini timer connectors ie same as used on fuel injectors and most EFI sensors

http://www.vehicle-wiring-products.eu/VWP-onlinestore/connectors/housings.php

You will find a few in a serria loom if you have one (one spare one on heater controls, I think there are a few more).. Else scrap yard they are quite common..

Dan

Sierra loom uses them on indicators the same, and most injector connectors are the same too.

hi, i used range rover's injectors plugs for mine.

i think all onjectors plugs are the sam, if you have a scappy near you u might beable to get some there.

stuart

Thanks for the tips.

Unfortunately I don't have an original car loom to raid. If I still can't get to a scrappy I'll try the standard crimp connectors plus heat shrink approach.

David