Board logo

Coilpack and connector
flak monkey - 15/4/09 at 07:09 PM

Not sure what people generally use (zetec coil packs?), but anyone got a coil pack and connector suitable for use on my pinto?

Cheers,
David

RichardK - 15/4/09 at 07:12 PM

I have a spare coil pack if you need it mate, don't have a connector though.

Rich

RichardK - 15/4/09 at 07:13 PM

and ht leads too if you need em

flak monkey - 15/4/09 at 07:17 PM

quote:
Originally posted by RichardK
and ht leads too if you need em


Ooo sounds like an option.

Let me know a price and I'll see if I can find some money. Lol!

RichardK - 15/4/09 at 07:25 PM

So whats the plan mate? Do you need to source/blag the following?

toothed wheel from a cvh sierra or buy a shiny one.

crank position sensor from a newish fiesta inc shielded wire.

edis 4

flak monkey - 15/4/09 at 07:30 PM

Thats the plan yes.

big_wasa has a crank sensor which i need to collect, all I need now is a toothed wheel. Already have an edis.

Considering trying out the built in coil drivers in the MS. But dont know if its worth the risk...

rusty nuts - 15/4/09 at 07:52 PM

May have a coil and HT leads in the garage you can have if you need them David but don't have tha LT connection.

brianthemagical - 15/4/09 at 08:09 PM

I think ford use bosch JPT plugs, not 100% though. I know PSA do. I'll have look in the morning, and if so buying a new plug will make for a tidier install.

big_wasa - 15/4/09 at 08:39 PM

coil pack plug sorted

RichardK - 16/4/09 at 09:34 PM

Ok, found the coil pack and ht leads, putting them in the post tomorrow.

Nearly sorted! just the toothed wheel!

R