Board logo

Zetec arp rod bolts
Danozeman - 15/5/09 at 05:06 PM

Wheres the cheapest place to buy arp con rod bolts for a zetec??


Or has anyone got any going spare.

philw - 15/5/09 at 05:11 PM

quote:
Originally posted by Danozeman
Wheres the cheapest place to buy arp con rod bolts for a zetec??


Or has anyone got any going spare.



try this link

Danozeman - 15/5/09 at 06:02 PM

Cant remember if they were 8 or 9mm now when i built the engine.

philw - 15/5/09 at 06:10 PM

quote:
Originally posted by Danozeman
Cant remember if they were 8 or 9mm now when i built the engine.


Check the part number on an ARP suppliers website

Danozeman - 15/5/09 at 07:57 PM

Looks like 2 litres have 9mm and 1.8s have 8. So im assuming mine are 8mm.

Has anyone got ford micro cat to check the standard part number to see if they size comes up??

The standard ones i fitted are 1053066.

Dusty - 15/5/09 at 08:10 PM

I believe all sivertops use 8mm all blacktops use 9mm. Doesn't go by the size of the engine.

snapper - 16/5/09 at 06:55 AM

If you sre going to rebuild the engine, do a strip down measure the old bolts, order new, check new bolts (some ARP fixings need a little machining/shortening to fit)

Danozeman - 16/5/09 at 08:22 AM

Im not rebuilding it. I have a scholar shortened sump to fit so though id swap the bolts while the sumps off. I dont wanna take the sump off and have to wait for the bolts as i like to keep it useable for when the suns out