Board logo

Fibreglass back panel
bilbo - 19/5/09 at 08:26 AM

Does anyone have one going spare, or does anyone know who makes them to fit a Book chassis? I'm looking really for black, but I'd consider any colour.
I used to see loads on ebay, but now I need one, I haven't seen one for months.


handyandy - 19/5/09 at 08:34 AM

you could try Triton Race Products, Mark makes top class stuff & good prices too, he,s a forum member .
sorry don,t know how to do a linky.
cheers
andy


bilbo - 19/5/09 at 08:47 AM

quote:
Originally posted by handyandy
you could try Triton Race Products, Mark makes top class stuff & good prices too, he,s a forum member .
sorry don,t know how to do a linky.
cheers
andy


I have a link to his site (here). Unfortunatly, he only seems to do stuff for the Haynes Roadster these days - IIRC, the roadster is wider than a locost, so a back panel for that wouldn't fit

[Edited on 19/5/09 by bilbo]


handyandy - 19/5/09 at 08:53 AM

i didn,t realise that, it still maybe worth a call to him, as on his website yes its all Roadster bodywork but worth asking if he can do a tub for you.
and no i.m not on commission its just that i have his bodywork & its very good quality.
cheers
andy


MikeR - 19/5/09 at 09:53 AM

the tubs that where on ebay didn't 100% fit a locost chassis. I believe it was fractionally smaller so you'd have to remove the steel hoop at the top to fit it.


RK - 19/5/09 at 11:43 AM

Try Alan at AGM sportscars. His is NICE!


Marcus - 19/5/09 at 11:47 AM

The MK Indy one fits the book chassis fine. It is an inch deeper, but once it's on you can't tell


bilbo - 19/5/09 at 12:41 PM

Thanks for the replies.
The AGM prices look very reasonable too.
I can't find the prices for MK on their site - I'll give them a ring.

Thanks again,
Bill


cjtheman - 20/5/09 at 09:50 PM

hi
give white racing a shout very good quality and cheap
hth
cheers
colin