Hi everybody,

I need the bolts to connect my propshaft into the car, its a 3.62 lsd and I'm not sure if I need bolts with nuts. Does anybody have any new?

Also does anybody have any gearbox oil left over for a type 9? preferably fully synth, but I'll take some 75W90 part synth if thats whats going

the bolts are a fine pitch M10x1.0 (or maybe M12, I'd need to go and find a set to measure)
also they are grade 10.9

but if you've got a Dax prop I think it comes with new bolts (if you can find them)
I'll dig some out later and measure them (I might have a spare set to send you....)

[Edited on 1/6/09 by mcerd1]

I bought by prop second hand from a fellow dax builder, Dave (creamytash) so I don't think I have the prop bolts.

If you do have a spare would you be able to send me a U2U - failing that the sizes would be great too

I'll have a look later on....

they are M10 on my atlas, which i think is the same as the sierra diff

found the prop eventualy...... linky

the bolts that are with it are:
M10x1.0,
grade 12.9,
socket cap heads (allan key heads)
25mm long,
fully threaded

and they have some spring washers with them

[Edited on 8/6/09 by mcerd1]