I'm after some aluminium approximately 6-8mm thick by 100mm x 400mm

So rectangle basically.

Thanks

You could get two out of this if you cut it carefully link

That might be a good idea ! Just incase i mess one up

Wood working coping saw used with cutting fluid works a treat on ally plate , cut my manifold from 12mm plate to rough shape easily. Should reduce any wastage to a minimum

UKROY's a decent seller too, I've had quite a bit of stuff from him, very quick, and reasonable prices.

Cheers guys, i've almost emailed 3GE, flak said he's good, and can lazercut it for me. Waiting on prices !

UKROY's seems to be cheapest so far for aluminium sheet.