Board logo

aaarrrggghh why does stuff vanish
mookaloid - 2/8/09 at 07:38 PM

Started assembly today and all going well until I went to the place where I stored all the bits for my rear calipers and one of the stupid little stainless plate thing that clips into the hole in the caliper has just evaporated in to the air

So I thought no problem I'll just order one form Brakeparts.co.uk but they don't sell them

So please help fellow locosters, please can someone tell me where I can buy one? or better still does anyone have one they would be able to swap for a couple of beer tokens?

Cheers

Mark

RichardK - 2/8/09 at 07:48 PM

It'll probably be next to the pen and tape measure

Sorry can't help with your plate except for an offer to help to make one if possible?

Cheers

R

mookaloid - 2/8/09 at 07:58 PM

quote:
Originally posted by RichardK
It'll probably be next to the pen and tape measure

Sorry can't help with your plate except for an offer to help to make one if possible?

Cheers

R


Both pens and all 3 tape measures are in the top of my tool box and it's not with them

If we can find some some very thin stainless sheet then we could certainly make one - nice idea

Any one got any very thin stainless steel I'm guessing its about 1/4 mm thick and 3"square? I'll measure it later for actual thickness.

jacko - 2/8/09 at 08:33 PM

One in the post
send your addressby u2u
Graham

mookaloid - 2/8/09 at 08:40 PM

quote:
Originally posted by jacko
One in the post
send your addressby u2u
Graham


Top bloke Graham

Thank you very much

Cheers

Mark

jacko - 2/8/09 at 08:50 PM

No problem
Graham

DarrenW - 2/8/09 at 10:57 PM

Ive just checked my pockets etc and cant find one! Did i go home too early?

Looks like top lad jacko wins the day.

mcerd1 - 3/8/09 at 07:17 AM

just for future reference....

biggred seem to have most of bits that no one else sells:
http://www.biggred.co.uk/