Board logo

275lb 1.9" ID springs
flak monkey - 18/8/09 at 09:45 AM

Anyone got a pair of 275lb springs going spare, either in yellow or black?

Need about 8-9" long if my memory serves me correctly.

Willing to swap for my pair of 325lb ones.

Cheers,
David

speedyxjs - 18/8/09 at 09:58 AM

If you dont swap the 325's, i may be interested in them . The ones i have atm are too weak for my motor but not sure what they are.

[Edited on 18-8-09 by speedyxjs]

Andy D - 18/8/09 at 10:23 AM

I have a pair of yellow 1.9 9" 240lbs... too soft I guess..

flak monkey - 18/8/09 at 10:25 AM

quote:
Originally posted by Andy D
I have a pair of yellow 1.9 9" 240lbs... too soft I guess..


I should think so. 275lb is a guess at the mo though.

Basically my 325s are going to be miles too stiff with the duratec planted in the chassis much further back than the pinto (they are a tad hard for the pinto TBH). 275lb seems to be the std springs that most manufacturers supply with the kit so I thought it was a good starting point if nothing else

jeffw - 18/8/09 at 01:02 PM

Since we are swapping springs I have a pair of 8" 350Lb 1.9" ID black ones that could do with a new home...

PumaWestie - 18/8/09 at 02:53 PM

Ive got some 275lb x 8" long in 2.25" dia

Also got some 250lb, same length, same dia.

Any use to anyone?