Hi do you know if anyone still sell the rubber cover that goes over the clutch cable & release arm.
Its an old 4 speed box.

or if anyone has an old one they no longer want.

Cheers
RD

[Edited on 23/9/09 by rallyingden]

I left mine off, think of the weight !!

Saw one at Stafford that just had a flat plastic cover cut to shape with a slot for the operating arm to move in. Looked OK to me. How about doing this and then fitting a bit of rubber sheet with a slit in it to distort as the arm moves if you are bothered about cr*p getting in?

ive got two or three in the garage, you can have it for the cost of a double decker

U2U sent to arrow Engineering


Cheers