Anyone got rear shaft for a flanged LSD. need to change from car from push in style to flanged.

are you changing the hubs as well as the diff ?

or do you want a pair of CV's to make some shafts that have a bolt-on end for the diff only

I've got a pair of bolt-on CV's you could have
(and pair of old push-in shafts that might be the right ones, but I'm not sure how to check them without taking them apart)

[Edited on 20/11/09 by mcerd1]

I mannaged to pick up an LSD a while back but it has flanges on it.

Some how I need to get that to fit my Indy that has push in shafts.

So not to sure what bits I need just know I don;t have the correct bits.

I assume its a 7" diff with 100mm flanges...

all the fords that used the bolt-on (/flanged) diffs had rear discs, which have different hubs too

someone on here has detials, but basicaly there is one size of push-in shaft that has the right splines on it, so you can swap the inner CV's from push-in to bolt-on ones - so you don't need to do anything to the hubs or brakes


[Edited on 20/11/09 by mcerd1]