LocostBuilders - powered by XMB

Wanted: Sierra Handbrake Half Moon and Stem (photo attached!) (Oh, and Cable!)

Steve Hignett - 7/1/10 at 12:25 AM

H All,

Does anyone have the "extra bits" of a Sierra Handbrake mechanism?

I have attached a photo for clarification, the buts required are the pieces that join the cable to the handbrake itself - the half moon bit and the stem connecting the two together...

*** Also wanted - Sierra handbrake cable to suit Drum brakes (if in v good condition!) ***

TIA
Steve

Macbeast - 7/1/10 at 08:14 AM

Don't forget the clevis pin thingy to connect the half moon to the pull rod

gavin174 - 7/1/10 at 09:16 AM

The half moon (compensator) is attached to the cable

the rod is normally riveted to the handbrake lever

you could make one with a piece of small round bar with a nut welded on each end.

jonesier1 - 7/1/10 at 10:42 AM

u2u me ,i think i got the req parts,will check.

locobri - 7/1/10 at 12:56 PM

I've got the half moon bit if still needed

mistergrumpy - 7/1/10 at 03:38 PM

I think I have a half moon too.

mangogrooveworkshop - 7/1/10 at 06:18 PM

http://retrorides.proboards.com/index.cgi?board=pfsw&action=display&thread=71809