as im using a Fiesta RS1800 injector sandwich plate on my silvertop 2 litre mondeo zetec i need a combination of gaskets.
Im after a 1600/1800 Fiesta/Escort inlet gasket like this



But not like this



[Edited on 15/1/10 by will121]

I want one to Burton power do them but way over price.

I will try fords next week if work calms down.

I used this stuff it's been fine

Edited to add, mine's used on a homemade bike carb manifold, I didn't want any "air channels" or anything, just a plain gasket

[Edited on 15/1/10 by UncleFista]

I used the one in the top picture, got it from burton power. I just used a bit of gasket compound in the channels to block them off as it is only the thickness of the green gasket paper.

quote:

---

Originally posted by big_wasa
I want one to Burton power do them but way over price.

I will try fords next week if work calms down.

---

Thanks you have saved me the bother. Gasket paper it is then.