Board logo

Wanted: Type 9 mounting plate
dan8400 - 7/2/10 at 09:52 AM

Need a type 9 mouting plate (from under the sierra) My rubber donut had collapsed... Has anyone got one?

Thanks
Dan


rusty nuts - 7/2/10 at 09:58 AM

Have a look at the Cateringvan mount , it's stronger and not a lot of money. Might need a slight mod to the mounting plate but not difficult


dan8400 - 7/2/10 at 10:02 AM

Thanks Rusty i'll check it out


Dan


dan8400 - 7/2/10 at 10:10 AM

Is it this one?

https://www.caterhamparts.co.uk/product_info.php?products_id=146&osCsid=285d9c6ab31712641c76795d70d59793

looks about right

Dan


mcerd1 - 7/2/10 at 11:29 AM

thats the one

I'm fairly sure that its just the old 4 speed mount (escort ?) - westfield use it as well - but caterham are cheaper at the moment

its quite a bit smaller than the sierra one - the holes are closer together


[Edited on 7/2/10 by mcerd1]


rusty nuts - 7/2/10 at 11:46 AM

Yes that's the one, it's much firmer than the Sierra item but will need the mounting plate modifying. Popular mod