Anyone got one they don't want/need, beer tokens waiting,
you seen this one Alex ? linky
yup but if he thinks im paying £50 for it he can jog on!
so what did you say when you saw the price burtons are asking for new ones :lol:
ps- I'm still keeping an eye open for a BGH box for you.....
[Edited on 14/2/10 by mcerd1]
got a box now! just eye-ing up one of the fuel tanks scruffy is putting together on the DROC
PS Burtons can Swivel
[Edited on 14/2/10 by omega0684]
what kind did you get in the end ?
(I'm going to have to give burtons even more money tomorrow - I need another head gasket 
)
i got this one
http://boardroom.wscc.co.uk/cgi-bin/ikonboard.cgi?act=ST;f=8;t=77
580;hl=gearbox
i have a screen on its way as well and new engine!
can you not make your own manifold?
heads a stock EFI but with bronze guides, 3 angle valve seats and a little skimmed off
just got a piper 285 cam for now
the bottom ends bored out to 93mm with forged pistons, cossie crank/con rods, steel flywheel - all ballanced and good for 9k+ rpm (the head will limit
that for now)
and I'll be running all that on ZX9R carbs + megajolt - so it shouldn't be far off the spec of your before your EFI upgrade
might do some porting / big valves / lumpy cam..... later on once its been on the road a while
(I guess EFI is an option - but I still like carbs better 
)
...or I could swap to an NA cossie head 
but I'd need new pistons for that to keep the CR up, new manifolds and the heads arn't cheap either so that'll have to wait
[Edited on 14/2/10 by mcerd1]
quote:
Originally posted by boggle
can you not make your own manifold?
i would quite like one that will be matched up to the throttle bodies and to the head but imagine this would cost me a
pretty penny or two! 
^^^ opps - I hit edit instead of quote
stock head, 42mm inlets and 36.1 exhausts on a EFI head?
i bet that will change before the end of the year!
my prediction: full EFI set up with OMEX or Jenveys! Full race spec head with big valves, major porting and VERY LUMPY Cam ,My crystal ball is
misting up now, i'd better put it away 
[Edited on 14/2/10 by omega0684]
yeah same as the carb'd ones - its just the ports that are different
quote:
Originally posted by omega0684
i bet that will change before the end of the year!
could probably get you a custom one made for around £120 all in....
quote:
Originally posted by omega0684
yup but if he thinks im paying £50 for it he can jog on!
quote:
Originally posted by bogglecould probably get you a custom one made for around £120 all in....
he would have to supply the drawings and material for it to be that cheap
quote:
Originally posted by boggle
he would have to supply the drawings and material for it to be that cheap
i am.......