Board logo

4 into 1 stainless Merge Collector
hicost blade - 20/8/10 at 12:22 PM

Anyone know the best place to get a stainless 4 into 1 merge collector with 4 1 5/8" inlets and a 2" outlet???

Please

Dave

pewe - 20/8/10 at 01:10 PM

Google Simpson Race Exhausts in Slough - think thery may do them.
HTH.
Cheers, Pewe

AdamR - 20/8/10 at 01:24 PM

OJZ Engineering are very good. Merge collectors are never cheap though - they usually take 8-10 hours to make IIRC, so that's a lot in labour alone.

hicost blade - 22/8/10 at 06:10 PM

quote:
Originally posted by AdamR
OJZ Engineering are very good. Merge collectors are never cheap though - they usually take 8-10 hours to make IIRC, so that's a lot in labour alone.


Tell me about it £175 +vat is the cheapest I can find........

Thanks for the help guys

Dave

Macbeast - 22/8/10 at 07:04 PM

I have one that was supposed to be for a Tiger. Don't know sizes but I'll check tomorow.

Macbeast - 23/8/10 at 04:42 PM

size is 50mm outlet, 45 mm inlets

coyoteboy - 26/8/10 at 10:25 AM

See if these guys have one, most of their collectors seem to be around the $50 mark:
http://www.coneeng.com/

NS Dev - 4/9/10 at 09:35 AM

If you can get me 4 off 1 5/8" 45 degree bends I will make you one for £90

I make a lot of stainless merge collectors but I can't get that tube size off the shelf!