Board logo

Wtd: New HT Leads for Ford Coil PAck
MakeEverything - 7/9/10 at 08:28 PM

I fitted the HT leads today to try and see where the coil pack needs to go, and i noticed that the renault HT leads dont fit the Ford coil pack.

Does anyone have any new Zetec HT Leads they want rid of before i go hunting?

mrwibble - 7/9/10 at 08:54 PM

just a note of caution, there were 2 different boot fittings for the coil packs on the zetec. the earlier coils had a shiny brown plastic around the connectors and iirc the ht leads had a clamp like projections either side. the later coils were completely black and more matt in appearance, with simpler push on fittings.

MakeEverything - 7/9/10 at 08:58 PM

quote:
Originally posted by mrwibble
just a note of caution, there were 2 different boot fittings for the coil packs on the zetec. the earlier coils had a shiny brown plastic around the connectors and iirc the ht leads had a clamp like projections either side. the later coils were completely black and more matt in appearance, with simpler push on fittings.


Thanks. I know the clamp like fittings you are talking about, and its not those i need.

I used to be able to buy NGK spark plug heads and cable to make HT leads up on gas furnaces, but i cant seem to get them any more?

mrwibble - 8/9/10 at 10:25 AM

imo some magencor blue or red leads always look nice, the spec of the engine prolly warrants it