Board logo

Mk indy exhaust manifold or where to get one
oddjob - 7/5/12 at 09:59 PM

Hi
I'm on the way of fitting my zx9r c2 engine into my mk Indy and can't get a exhaust manifold made or of the shelf I can get one but they quoted £900 for full system I thought that's steep any help would be great

locoboy - 8/5/12 at 06:15 AM

MK? or any of the other kit manufacturers that like BEC installations. My R1 manifold was about £150 if i recall, from MK.

matty h - 8/5/12 at 08:09 AM

Martin Keenan at MK engineering http://www.mkengineering.co.uk/contact.htm
or MK Sportscars http://www.mksportscar.co.uk/index.php?option=com_content&view=article&id=83&Itemid=56
They are both close to you.
Matty

sdh2903 - 8/5/12 at 09:06 AM

I was in same position only my car is a bit of an oddball so none available off the shelf. I eventually got one for an Indy from Martin Keenan at MK engineering. Cost me £150 and another £30 to have it tweaked for my car. Martin was very helpful and only took a week to arrive.

Best Quotes I got for a full system manufacture were around £800.

Getting the manifold from Martin, cat off ebay and the carbon can came with the engine my whole system cost me £275.