LocostBuilders - powered by XMB

M14 X 1.5 water temp sender take off adapter

Westy1994 - 20/5/12 at 06:01 PM

Hi,

Does anyone have one kicking about in the garage, I have found one on the Demon Tweeks site, but do begrudge giving them my cash. Its the inline adapter that would fit between two flexible pipes, female thread MUST be 14mm by 1.5 pitch.

EDIT TO ADD - Or a M14 x 1.5 tap , to tap out the adapter I currently have

Cash waiting in either case.

[Edited on 20/5/12 by Westy1994]

I predict a Riot - 20/5/12 at 07:31 PM

Car Builder Solutions also do a nice one at a reasonable price.

Westy1994 - 20/5/12 at 07:44 PM

Cheers for the parts on that site, actually the price is very similar to that of Tweeks if you include the adapter that I will need to use with their generic one. BUT, it has given me another option, just use the cheaper adapter that they sell and fit to the exsisting old take off that my engine uses for its fan switch - IF it IS 22mm that is. I use a programmable fan controller so that take off is redundant.

OK off to the garage I go...........................

Rich

Westy1994 - 20/5/12 at 07:56 PM

Well blow me down, it was indeed 22mm.

Order going into CBS right now

Thanks for that Mr Riot.

Please consider this thread filled.

Rich