Board logo

Wanted Gearstick to fit type 9 and standard 2.0 pinto clutch
pmc_3 - 7/6/12 at 05:05 PM

I now have the type 9 gearbox, flywheel and starter I need for my project but am missing a gear stick and a standard 2.0 pinto clutch. I know a new clutch is only about £40 on ebay but thought i'd see if someone had a new one laying around on here, this is locost builders after all!

JAMSTER - 7/6/12 at 06:19 PM

i have a clutch £15 not new but plenty of life in it

[Edited on 7/6/12 by JAMSTER]

pmc_3 - 7/6/12 at 07:50 PM

Cool, sierra one? I see you're Peterborough too

JAMSTER - 7/6/12 at 08:02 PM

yes sure it's sierra i will have to dig it out

im near whittlesey

pmc_3 - 7/6/12 at 08:05 PM

Let me know when you've found it and i'll pop over one evening and get it. Cheers Pete

JAMSTER - 7/6/12 at 08:53 PM

i have dug it out and it is a luk can't find the thrust bearing.
is this any good to you if so let me know and i will u2u my address.


[Edited on 7/6/12 by JAMSTER]

pmc_3 - 7/6/12 at 09:19 PM

Think I still have release bearing on clutch arm. Take a tenner?

Xtreme Kermit - 7/6/12 at 09:27 PM

Pretty sure I have a type 9 lever in the garage. How about £8 +P&P?

[Edited on 7/6/12 by Xtreme Kermit]

pmc_3 - 7/6/12 at 09:30 PM

Sounds good, u2u on its way!

JAMSTER - 7/6/12 at 09:34 PM

£15 take it or leave it

pmc_3 - 7/6/12 at 09:38 PM

Sorry didn't mean to offend you, sounded like you thought you had the thrust bearing initially so thought i'd make an offer. £15 is fine u2u me details, can collect tomorrow night or sunday at some point. Pete