LocostBuilders - powered by XMB

Ford 711M 1600 crank

nilocp - 7/6/12 at 05:16 PM

Just stripped down the donor engine, crank on .010 and .010 Result!!

Except that the PO had put 1 thrust in the wrong way round.

So I now have a very nice scrap crank!! Unless anyone has got .030 O/S thrusts available?

So will probaly need a 1600 crank. I can get ground but must be usable please.

Colin

[Edited on 7/6/12 by nilocp]

nilocp - 26/6/12 at 09:52 PM

I still need 711M 1600 crank.

The thrust washer thing will not work.

Colin

Ian.C - 27/6/12 at 07:50 AM

I am sure I have got one in the garage from my rallying days, if I do have one it will be tuftrided. I will have a look tonight. Ian

Ian.C - 27/6/12 at 05:23 PM

Just found it, its a bit dusty but there's no rust on it. Should there be a code on it to confirm its a 1600 crank.