Yeah this is a long shot but you never know what folk have kicking about...

There use to be a bellhousing adaptor that let you fit the 2.8 siamese port V6 found in capri's/granada's etc to the series 3 gearbox to swap out the sluggish 2.25 petrol

Anyone have one or know where to get one now?

Or even an adaptor for a similar engine, excluding the rover V8 as that is too big

Thanks

[Edited on 12/6/12 by Mr Whippy]

the 8v & 24v 2.9 V6's should fit the same bellhousing/adaptors as the 2.8 (they are different from the essex and duratec ones though)

but you could always make an Owelly style DIY adaptor: linky

[Edited on 12/6/2012 by mcerd1]

[Edited on 12/6/2012 by mcerd1]

Could give Steve Parker a ring.

They used to do this stuff. It
says it's now discontinued but got to be worth a phone call.

http://www.steveparkers.co.uk/convford2_3_8.php?PHPSESSID=d88097f9bd182090b0f0102bb0e89b44

Cheers guys

I'll look into that but I don't have the equipment to machine one myself, would be nice if I could