Board logo

wtd: steering wheel
steve8274 - 18/6/12 at 10:02 PM

hi all
i still have original sierra steering wheel on my car and wish to change for something a little smaller and bit more modern.
anyone selling one?
if not, where have people purchased theirs from? the wheels i have seen dont come with bosses, then when you look for boss, either dont list for sierra or hugely out of my price range
any help appreciated
steve

yellowcab - 18/6/12 at 11:03 PM

I have a Momo Millenium steering wheel which is 350mm I believe...

jossey - 19/6/12 at 08:35 AM

I got a steering wheel with boss and column for a corsa which I cut the hexagonal boss adaptor to and got a fabricator to weld it to where my screw thread on my column went.

Cost £30.

Won't ever pass iva but looks better than the steering wheel I had.

steve8274 - 19/6/12 at 01:45 PM

thanks for replies
have just measured my wheel and it measures approx 370mm so think i would like smaller than 350mm.
with regards to welding the wheel on,i am not too sure. for one, i cant weld plus i may wish to change in future again.
sure there must be suppliers of sierra bosses. i just cant find them, especially cheaper ones.
does anyone know if any other vehicles would fit it
thanks
steve

loggyboy - 19/6/12 at 02:13 PM

Steve, your signature is WAYYYYYYYYY too big!

yellowcab - 19/6/12 at 03:52 PM

I thought the opposite, I didn't think he had a sig... until I left the page open for 10 minutes then half the photo began to load

/joke / justsaying

steve8274 - 19/6/12 at 09:38 PM

hi
signature now removed. dont know how to make smaller.
steve