Board logo

Steel RHS 40 x 20x 18swg
Mistron - 20/6/12 at 08:24 PM

Hi folks,

anyone got a decent source of Mild steel RHS? I'm looking for 2m of 40mm x 20mm x 18swg and can't find any one selling it?

Cheers,

Al

iank - 20/6/12 at 08:28 PM

0.3mm too thick, but might do depending on how strict your requirement is
http://www.metals4u.co.uk/Mild-Steel-Box-Section/40mm-x-20mm-x-1.5mm-Mild-Steel-Box/49/7397/detail.asp

Mark Allanson - 20/6/12 at 08:36 PM

In that thickness it would be called ERW, I have never seen steel in that size (10 years as a welder/fab)

Mistron - 20/6/12 at 08:48 PM

Perfect, many thanks.

they used to use it in the fabrication shop of my previous employer. I've run out now though.

Thanks again,

Al