
I'm looking for a Pinto Bosch dizzy. It's the inductive discharge type I think. Vac advance unit on the side, and a two pin plug. See
pics.
The numbers on the body are:
JGFU4
0 237 002 078
83 HF 12100RA

Looks like these things are getting rare . 
andrew might be out your price bracket but a new dizzy coil full kit could even have a coil pack is about 220 QUID from h and h ignitions with an advance curve to match your engine mods got one on my crossflow and it the dogs
quote:
Originally posted by Andy D
Looks like these things are getting rare .![]()
(still need the bottom half of a dizzy to drive the oil pump on
a pinto though...) I am aware of the aftermarket types available, but it would be an easy plug and play if I can find an identicle one. I've had mine to bits to see
if I could do anything about the spindle wear, and fear I may have damaged it in the process. I've got the sump off at the moment, so won't
know for sure untill it's back together again.
Is this distributor the one fitted to P100 pinto engined pick-ups? ..or is (or should that be were!) there any onther Sierra models with it fitted?
quote:
Originally posted by Andy D
Is this distributor the one fitted to P100 pinto engined pick-ups? ..or is (or should that be were!) there any onther Sierra models with it fitted?
) It's an electronic one. Very basic, weights and vac unit control advance.
The H&H rebuild service could be put to use here, thanks! 
u2u sent regarding dizzy.