Hi all,

thought I would ask here as you never know. Im in the process of changing the turbo on SWMBO car. Now the turbo failed in a big way but its had oil issues for some time. Basically this is what I need cleaning.

Inlet manifold. Full of oily gunky dirty waxy yucky stuff and lots of it.
Intercooler. Has had quite a bit of oil through it and needs a good clean out
Intercooler pipe work. Again oily inside and out and needs a good clean.
Turbo feed and return pipes. Just need a good flush through.

I am trying to clean out the bits in the garage, but the prob is is my garage is so clean and tidy with the kit in it, I will only end up with oil splashed everywhere! And it would take forever with a tub of gunk, a small bucket and a wire brush. (this needs doing properly)

So, has anyone got a decent parts washer that I could use, or know of anyone who could clean out a few bits for me. Im more than happy to supply some cleaning fluid stuff if that helps.

Please let me know, so as soon as I have these parts clean I can get on with putting the car back together and stop "her" from borrowing my nice new car all the time.

Please can anyone help!!!

Thanks

Andy

[Edited on 19/7/12 by AndyW]

AndyW,

I have a Ozzy Juice Bio-Cleaner at work and I live very close to Luton Airport.

Its a very gentle, non-abrasive parts cleaner which is fantastic !

Throw me a few beer tokens and Ill clean it to the best of my ability if you want.



[Edited on 19/7/12 by Toprivetguns]

Petrol works well for flushing oil out of intercoolers etc.

Just take all it bits upstairs and clean them in the bath

I also have access to an ozzybath at work. i work near cambridge if your interested.

Thanks guys, I will u2u over the weekend and we can get it sorted, really appreciated!!

LCB to the rescue once again!!


Andy