I'm after a decent pillar drill, ideally bench mounted (but would consider a floor stander) but must be single phase, 240v.

If anyone's got one they no longer use, let me know!

[Edited on 17/8/12 by thesecondprize]

I would not exclude looking at 3 phase drill's mine is an old Meddings, just made up the third phase with a capacitor.

It has less power than when on 3 phases, which is still a lot more than a cheap one from machine mart

Regards Mark

Cheers. Can you provide some more detail on what is required to convert to 3 phase?