Due to me not having the minerals to remove the through bolts from the lower wishbone i now have to useless rear uprights so i am looking for 2 to replace the ones i am about to put in the bin.

Require 2 rear uprights that have had all bolts removed from them. Just need the bare items.

Any help much appreciated. Croydon based.

I removed the bolts from 3 sets of mx5 rear uprights in 2008 and I didn't have any trouble at all. I can't even remember how i did it? Whats the issue?

Did you post another thread about this? my brain is failing.

I might still have a set in the back of the garage. Assuming yours are not damaged I'll do a straight swap if you cover postage.

[Edited on 27/8/12 by liam.mccaffrey]

Yes it's me that has the other post running. I will take to local garage next week to see if they have a press. If they dont and u have a spare set I will do a swap for sure if that's good with u

I cut the lower bolts with a powered hack saw then heated the bit of bolt left and hit it out with a hammer and chisel.

Did u cut both sides of te arm as I cut both outside ends of and even a sledge hammer won't move it

No it wont but heating it up with Oxy bottles will make it easy to get out. Mine were rock solid. The Bolts are best part of £13 each!