Board logo

Rear diff, drive shafts, uprights etc
capri_big_jim - 9/9/12 at 10:40 AM

Hi guys.

Im after all of the above for a new project. Ideally approx 3.6 diff needed due to being bike engines.

Any make, but must be in good working condition

Jim

Kev99 - 9/9/12 at 11:16 AM

Try looking at this thread hes got most if not all u need
Hope it helps


look here

capri_big_jim - 10/9/12 at 09:30 AM

Still after these guys...

Jim