Hello all.
im on the hunt for a sandwich plate for between my pinto and my type 9 gearbox unsure of its real name but im guessing its around 1mm thick ally pressed and cut to suit the type 9 box with all pre drilled holes, just thort id ask before trying to make one.

These are hard to source at the breakers. They will not sell without the engine. I had to modify a mondeo one to fit a Zetec to a type 9. If you can make a template you could get it laser cut ,much better than using a jig saw.

If all else fails try this

eBay Item

Adrian

don't have a spare one, but I can trace one out onto paper and post it to you FOC if that helps (won't get a chance till next week though)