Board logo

pinto carb setup
Apollo1600 - 14/11/12 at 03:16 PM

Hi there,
Im trying to get some carbs for my 2.1 pinto. Im ideally after some twin weber 45s but feel free to offer what you have.
Cheers

snapper - 14/11/12 at 03:58 PM

Look at bike carbs, easy to set up, stay in tune better and much cheapness compared with 45's

dave r - 14/11/12 at 04:08 PM

dgas complete with manifold ?

Daddylonglegs - 14/11/12 at 06:29 PM

quote:
Originally posted by snapper
Look at bike carbs, easy to set up, stay in tune better and much cheapness compared with 45's


I've got a set of ZX9 carbs to fit to the 2.0 Pinto. What else apart from the manifold and fuel pump do I need? I guess Megasquirt or similar?

JB

rash12 - 14/11/12 at 09:42 PM

single 45 with manifold ?

splitrivet - 15/11/12 at 12:15 AM

Why 45s, got twin 40s mint nick were off a 2.1 with pinto manifold , two service kits, 4 trumpets, custom turned adaptors for minimoto filters some spare jets and manuals ready to rock and roll, u2u me with an offer. Yes bike carbs are good but dont let anyone fool you they can be a faff to get all the relevant bits you need to fit.
Cheers,
Bob

mcerd1 - 15/11/12 at 09:16 AM

quote:
Originally posted by Daddylonglegs
quote:
Originally posted by snapper
Look at bike carbs, easy to set up, stay in tune better and much cheapness compared with 45's


I've got a set of ZX9 carbs to fit to the 2.0 Pinto. What else apart from the manifold and fuel pump do I need? I guess Megasquirt or similar?

JB

they are just carb's, they are no harder to setup than any other carbs....

you'd be best with megajolt for the sparks (TPS version), but if you like you can stick with a bog std. dizzy with points!

other than that you'll need to sort out an air filter/box (just like any other carb / throttle body)

[Edited on 15/11/2012 by mcerd1]

FASTdan - 15/11/12 at 10:12 AM

I can do a full bike carb package of manifold, hoses, carbs, filter, pump etc or any combination of parts if you want to source certain parts or already have your carbs etc. U2U or email me dan@danstengineering.co.uk for more info.