LocostBuilders - powered by XMB

Sierra rear hubs

JeffJeffers - 23/2/13 at 08:01 AM

Morning
A friend of mine at work is building a Ford Pop and needs some sierra rear hubs.
He is using a Granada as a doner car but that has 5 bolt wheels and he is using 4 bolt.

jollygreengiant - 23/2/13 at 08:28 AM

quote:
Originally posted by JeffJeffers
Morning
A friend of mine at work is building a Ford Pop and needs some sierra rear hubs.
He is using a Granada as a doner car but that has 5 bolt wheels and he is using 4 bolt.

All he'll need is the 4 bolt outer wheel drive flanges from a Sierra with bolt in drive shafts. They are inter-changeable. OR from a Later Ford Scorpio which is four bolt with the same PCD as a Sierra.

[Edited on 23/2/13 by jollygreengiant]

big_wasa - 23/2/13 at 09:20 AM

There was an ultima with 4x108pcd hubs at selwyns last time I was there.

I havnt forgoten about checking over your pinouts, just work has been busy. I will try and get it done today.