Board logo

Outer wishbone tubes.
scutter - 27/2/13 at 05:03 PM

Folks after being let down by a mates mate. I need some tubes turning up to take my wishbone bushes.

They need to have a 29.2mm internal diameter and be 34mm long, the wall thickness i'm not too worried about as long as it's over 2mm. I need 10 tubes doing.

Can anyone help or know someone that can? Beer tokens waiting.

Regards Dan.

snakebelly - 27/2/13 at 07:06 PM

ive had some made for the Avon widetrack bones im making, cant remember the exact measurements but i had to have more done than i need , i can check in the morning.

scutter - 28/2/13 at 07:51 AM

quote:
Originally posted by snakebelly
ive had some made for the Avon widetrack bones im making, cant remember the exact measurements but i had to have more done than i need , i can check in the morning.



Many thanks. Dan.

snakebelly - 28/2/13 at 12:35 PM

Sorry they are only 31mm long with an I'd of 24mm so no good, sorry

snakebelly - 28/2/13 at 12:38 PM

Just on the phone to the chap that made them for me to see if he can help

scutter - 28/2/13 at 04:11 PM

Thanks, If not Gillman in the other tube thread stock some that are close enough.

ATB Dan.

snakebelly - 1/3/13 at 07:19 PM

my guy cant help im afraid, well he can but the minimum length makes it very very very expensive!