Board logo

Power commander for GSXR 1000 K1
Sloan85 - 14/5/13 at 05:01 PM

I'm after a power commander for a gsxr 1000 k1. Anyone got one they want to sell?

Cheers

doobrychat - 14/5/13 at 08:35 PM

you can use a later one from the gsxr range as long as the maps right..

Sloan85 - 14/5/13 at 09:19 PM

I believe I need a k1 or k2 so the plastic connectors fit my loom??

doobrychat - 15/5/13 at 07:48 AM

i post the very same question on gixxer.com a few weeks ago..

http://www.gixxer.com/forums/showthread.php?t=354370

Sloan85 - 15/5/13 at 06:28 PM

Did you get a power commander for your K1/2 then?

Ive looked at K6 power commander v on eBay but I dont see how the plugs will connect to the loom?

cheers

doobrychat - 15/5/13 at 06:41 PM

hi

they plug onto the injectors not the big main plug on the loom..

its a much better set up as the connections in the big plug are well known for failure..

Sloan85 - 17/5/13 at 05:19 PM

Still confused by this. Have you done this and got it to work? I emailed Dynojet who confirmed that it will not work.

[Edited on 17/5/13 by Sloan85]

doobrychat - 17/5/13 at 07:31 PM

go to the link on gixxer.com or go there and post the same question..

Dynojet will not admit it will work as they will lose a sale of a K1 PC3...

doobrychat - 30/5/13 at 10:16 PM

I have done it and it does work.. K6 pc3usb fitted to a k1/2 1000 engine and mapped... Passed emissions today at the IVA..