Hi all,

I am after an off-cut of either 3" mild steel round bar or 3"O/D thick wall tube (inside dia no larger than 60mm)

Minimum length 58mm.

Cheers

Tilly

[Edited on 1/6/13 by tilly819]

I think you will have to have a piece of solid bar bored out.

That's a 15mm wall you need something machined, what's its for that nigh on bullet proof!

Im doing the machining myself, that is the blank size, I am quite happy to bore out from solid.

8mm wall

Tilly

[Edited on 1/6/13 by tilly819]

[Edited on 1/6/13 by tilly819]