Board logo

Wtd Bonnet catch part
Kev99 - 3/8/13 at 07:14 PM

Im after 4 of the parts marked in photo if u got any or know where i can buy just them

Got the catches but not the little Keeper


Rod Ends - 3/8/13 at 07:46 PM

Doubt you'll find them separately.
There are plans for the latches and keeper on the Southco website so you could make your own.


indykid - 3/8/13 at 10:35 PM

Fairly certain you'll get something very similar if not identical from Protex

ETA - ....though I'm struggling to find any. I'll keep looking

[Edited on 3/8/13 by indykid]


Kev99 - 4/8/13 at 06:31 AM

Thanks indykid for what i want it for one of them will do

Just using it for a trackday Bonnet
as don't want to cut big hole for the standard airbox in my everyday bonnet

Kev.......................


YQUSTA - 4/8/13 at 10:17 AM

I recently removed them from my car so should have them in the shed, will take a look in a bit for you.


YQUSTA - 4/8/13 at 10:17 AM

I recently removed them from my car so should have them in the shed, will take a look in a bit for you.