LocostBuilders - powered by XMB

WTD- 2.0 pinto head.

MsD - 7/8/13 at 09:03 PM

Evening all,

A friend of mine has just asked if I have a spare pinto head- I don't, but I told him I know a place that will!

So I'm after a 2.0 pinto head in good working order please.

Mark.

SteveWalker - 7/8/13 at 10:05 PM

I have one (non-injection) removed a few years ago when I replaced it with an injection head. IIRC I pinched one of the rocker arm location springs (not the main rocker springs), 'cos one on the new head was weak. Otherwise it should be okay. I'm around a mile from the Trafford Centre.

FuryRebuild - 7/8/13 at 10:11 PM

I have a Dave Walker head, still attached to a pinto. It's also running a Tarmac rally cam and delivers serious horsepower. I have the matches set of dellortos set up by by Bogg brothers if your friend is serious.